Page 14 - Katalog 2022_GB

Alegra ULF 6400, Alegra LF BR 6400, Alegra MF BR 6500 Alegra ACE 7000 and MK Adventure 6000

7000
ULF 6400 Our new high-end spinning reel series for demanding requirements. froM 190 graMs

This reel was developed for both the Ultra-light and Method feeders. Of Absolutely silky smooth running, top line laying and a high performance
course, in each case it is also equipped with 2 release clips of different brake characterise these great reels. The reels are real lightweights,
strength like their two bigger “brothers and sisters”. Due to the special something every spin fisherman can appreciate. Ball bearings and main
NEU • NEW
spool depth it is suitable both for mono filament, and for braided lines. axle are saltwater-resistent, which makes the reel also suitable for fishing • N O U V EAU •
in salt water. The "Screw In" aluminium crank can be turned into the reel
body, thus the crank has no play.
• 5 precision ball bearings plus 1 needle bearing
• Release clip protected by utility patent • 6 precision ball bearings plus 1 needle bearing
• 5 soft and 5 hard Release Clips includedQuick-Stop-System (Q.S.S.) for • Extra light due to 40% Carbon in the housing
stopping rotor instantaneously • S stroke system for optimal line lay for casting
• S stroke system for optimal line lay for casting • Quick-Stop-System (Q.S.S.) to stop the rotor instantaneously
• Strong front drag (S.D.S) with extra large brake discs • Total Tolerance Control System (T.T.C.): any conceivable tolerances of
• Anti-Swing-System (A.S.S.) for optimum smooth running the crank, gear and drags are reduced to a minimum
• Total Tolerance Control, reduces tolerances to a minimum • Anti Swing-System (A.S.S.), prevents undesirable vibrations
• Anti-twist line roller • Finely adjustable drag (S.D.S) with large brake discs
• Knock-resistant housing with two-component varnish coating • Anti-Twist line rollers
• Aluminium crank • Aluminium spool
• Aluminium spool and spare spool • Screw-in Aluminium crank
• Optional left or right manual operation
ALEgrA uLtrA LIght FEEdEr 6400
Item- order- Line capacity weight gear proteCted by
No. No. m Ø mm g ratio utiLity patent ALEgrA AcE 7000
103240 /640 210 0.10/135 0.25 305 5.4: 1 Item- order- Line capacity weight gear spare spool
No. No. m Ø mm g ratio Aluminium saLtwater resistant
ALuMINIuM SpArE SpooL /720 105 0.20 190 5.2 : 1 193010/720
Item- order- Line capacity Spare spool 103010 /730 130 0.30 215 5.2 : 1 193010/730
No. No. m Ø mm ALEgrA 6400 uLF SpArE rELEASE cLIpS /740 170 0.30 275 4.9 : 1 193010/740
193240 /640 210 0.10/135 0.25 Aluminium Item- order- Spare release clips for:
No. No. Alegra 6400 ULF
190000 /000 5 x black, 5 x grey

BR

Due to the high demand, we decided to bring the Alegra MF 6500 (Medium
Feeder) and the Alegra LF 6400 (Light Feeder) also as free-running versions.
Both reels also have 2 release clips (soft and medium).
Thanks to the special spool depth, the reels are suitable for both monofila- Matze Kochs spinning reels.
ment and braided lines.
When you pick up the reel for the first time, you immediately notice how
smoothly and quietly it runs. The "culprit" is a completely newly devel-
What is the advantage of a free-running reel for feeder fishing? oped precision gearbox. In addition to the running characteristics, Matze
When using a normal stationary reel, the angler must either release the drag also placed particular emphasis on weight reduction during the develop-
and readjust the drag every time, or fold down the bracket so that the basket ment. So we developed a "skeleton" rotor with approx. 30% carbon fibre
comes down to it, always with the risk of a loop wrapping around the tip, content, which is extremely light and torsionally stiff. The Micro Disc
which is inevitable when casting leads to breakage of the tip. brake discs allow a very fine drag dosage and a jerk-free start of the
If the angler uses a free-runner reel, he only needs to actuate the free-run brake. The "Screw In" aluminium crank can be turned into the reel body,
system and the basket comes towards him without the risk of loop formati- thus the crank has no play. The reel is perfectly colour-coordinated with
on, since the line tension remains constant. He only has to set the free-run Matze's Meisterpeitschen rod series!
drag once before the start of the fishing so that the basket slides down at the NEU • NEW
desired speed. • 5 precision ball bearings plus 1 needle bearing • N O U V EAU •
• Skeleton rotor with approx. 30% carbon fibre
• 5 precision ball bearings plus 1 needle bearing • S stroke system for optimal line lay for casting
• Release clip protected by utility patent • Quick-Stop-System (Q.S.S.) to stop the rotor instantaneously
• 5 soft and 5 hard Release Clips included • Total Tolerance Control System (T.T.C.): any conceivable tolerances of
• Finely adjustable free run system the crank, gear and drags are reduced to a minimum
• S stroke system for optimal line lay for casting • Anti Swing-System (A.S.S.), prevents undesirable vibrations
• Bail Fix System: no unwanted turn back of the bail when casting proteCted by • Finely adjustable drag (S.D.S) with large brake discs
• Any of the crank, gear and drags are reduced to a minimum utiLity patent • Anti-Twist line rollers
• Bail is made from extra-strong, lightweight aluminium • Aluminium spool and Nylon/ABS spare spool
• Quick-Stop-System (Q.S.S.) to stop the rotor instantaneously • Screw-in Aluminium crank
• Anti Swing-System (A.S.S.), prevents undesirable vibrations • Optional left or right manual operation
• Finely adjustable drag (S.D.S) with large brake discs ALuMINIuM SpArE SpooL ALEgrA br
• Anti-Twist line roller Item- order- Line capacity Spare spool Mk AdvENturE 6000 Fd
• Aluminium spool and spare spool No. No. m Ø mm Item- order- Line capacity weight gear spare spool
• CNC mill-cut Aluminium crank 193240 /641 240 0.10 Aluminium No. No. m Ø mm g ratio Aluminium
• Optional left or right manual operation /651 350 0.10 Aluminium /620 100 0.25 225 5.5 : 1 190870/620
100870 /630 100 0.30 250 5.5 : 1 190870/630
ALEgrA LF br 6400 ANd ALEgrA MF br 6500 ALEgrA br SpArE rELEASE cLIpS /640 100 0.40 320 5.2 : 1 190870/640
Item- order- Line capacity weight gear Item- order- Spare release clips for:
No. No. m Ø mm PE/Mono g ratio No. No. Alegra 6000 BR
/641 240 0.10 / 130 0.25 415 5.2 : 1 /003 br 6400: 5 x black, 5 x grey
103240 190000
/651 350 0.10 / 170 0.25 435 5.2 : 1 /004 br 6500: 5 x black, 5 x grey
14 15